Skip to main content
EZ Gateway KNX to BACnet

EZ Gateway KNX to BACnet

Connect to the cloud and interface KNX certified products to BACnet management systems

The EZ Gateway KNX to BACnet (FS-EZX-KNX-BAC) is an easy-to-use, high-performance building and industrial automation IIoT gateway for integrators to connect to the cloud and interface KNX certified products to BACnet management systems in commercial buildings, campuses, and industrial facilities.
Show Less
Read More
EZ Gateway KNX to BACnet
EZ Gateway KNX to BACnet
Connect to the cloud and interface KNX certified products to BACnet management systems
Highlights
Videos
Options
Approvals
Literature
Highlights
KNX-certified products encompass a wide range of applications such as lighting control, heating, ventilation and air conditioning control, shutter/blind and shading control, alarm monitoring, energy, gas, and water metering, and audio and video distribution. The EZ Gateway KNX to BACnet integrates such KNX-based devices and systems to both flavors of BACnet-based management systems over BACnet MS/TP or BACnet/IP protocols. KNX to BACnet protocol translations include:

KNX to BACnet/IP
KNX to BACnet MS/TP

1. MSA GRID SUPPORT
  • Register your EZ Gateway to the MSA Grid interface for remote access to local applications, configuration, and device management
2. KNX INTEROPERABILITY
  • Connect with virtually any KNX-certified device out of the box
  • ETS Support: Seamlessly import KNX Group addresses from ETS to lower commissioning time
3. BACNET COV
  • Use the Change of Value (CoV) setting to reduce the amount of BACnet data overhead to allow network traffic to be less congested by transmitting data only when detecting a KNX device status has changed
4. DEVICEPROXY™
  • Minimize management and operational costs with granular visibility and control over each KNX device from a BACnet management station
5. REMOTE ACCESS AND SUPPORT
  • All FieldServer gateways come with Remote Access support. Once registerd to the MSA Grid, use the Remote Access capability to attach to the FieldServer gateway to monitor, maintain and troubleshoot installed equipment
Videos
Show More Videos
Show Less Videos
Options

Model Numbers

  • FS-EZ1-KNX-BAC: 500 point capacity
  • FS-EZ2-KNX-BAC: 1000 point capacity

Environment

  • Operating Temperature: -40 to 75°C (-40 to 167°F)
  • Relative Humidity: 5-90% RH non-condensing 

Power Requirements   

  • 9-30 VDC or 12-24 VAC
  • Current draw: @ 12V
    • FS-EZX-KNX-BAC: 240 mA

Enclosure   

  • Dimensions: 4.5 x 2.9 x 1.6 in. (11.5 x 7.4 x 4.1 cm)
  • Weight: 0.4 lbs (0.2 Kg)

Other   

  • Configuration/Diagnostic utilities
  • Table, wall, or DIN rail mount

Communication   

  • Baud: 9600
  • Start Bit: 8
  • Stop Bit: 1
  • Parity: Odd
  • Ethernet: 10/100 BaseT MDIX

 

 

 

Approvals
Approvals subject to change without notice and may differ based on configuration, part number and/or country. Contact Customer Service or check approval label on product for specific approval information.
Literature
Part Number(s)

Ask a Question


Thank you! An MSA representative will be in touch soon.