V-Gard® Visors for Welding, Cutting and Brazing Applications
V-Gard polycarbonate shaded visors are thick and molded to protect against damage from impact, elevated temperatures, weld spatter and infrared (IR) radiation. Ideal for autogenous welding, metal pouring, gas soldering and light cutting/brazing, they’re engineered for heavy-duty use.
V-Gard® Visors for Welding, Cutting and Brazing Applications
- Suitable for applications where welding, cutting and brazing hazards exist.
- Special visors, called nitrometers, work with V-Gard Retractable or Standard Chin Protectors
Approvals subject to change without notice and may differ based on configuration, part number and/or country.
Contact Customer Service or check approval label on product for specific approval information.
USA Approvals
Canadian Approvals
European Union
- CE Declaration of Conformity - DECLARATION DE CONFORMITE CE Visors EN
- Declaration of Conformity - Visors
- EN166:2001 & EN1731-2006 - CE2247_140827
- Russia:& Kazakhstan
- Ukraine
EN166 marking explanation=
"3" Light transmittance 8.5%-17.8% (Welding - % UV % IR)
"5" Light transmittance 1.2%-3.2% (Welding - % UV % IR)
"4-3" Light transmittance 8.5-17.8% (IR EN171)
"4-5" 1.2-3.2% (IR EN171)
"1" highest optical quality for permanent use
“B” High speed particles with medium energy impact (120 m/s)
“T” Additional resistance at extreme temperatures (–5 and +55 °C)
“3” Liquid droplets and splash
“9” Non-adherence of molten metal and resistance to penetration of hot solids
Australia/New Zealand
- AS/NZS 1337.1:2010
