Supplied Air Respirators (SCBA)

3S Positive Pressure Full-Face Masks

With more than five million units sold, the upgraded 3S Full-Facepiece Respirator offers safety, comfort and durability. The face blank is made of a softer rubber compound (and also yellow silicone in another option) and has a wide sealing frame and deeper chin stop for a snug, comfortable fit. The lens is made of impact-resistant polycarbonate (and silicate-coated glass and Triplex glass in other options) and offers a wide field of vision for excellent viewing. The harness allows for quick donning and removal and achieves a pressure-free fit in combination with a protective helmet. The inner mask allows for optimal air flow and eliminates lens fogging. The mask comes in more than 50 different versions, allowing users to find the perfect mask.
view details

Air Cylinders

Choose from a complete line of air cylinders, including lightweight carbon, economical aluminum or affordable composite. Choose from eight different cylinders, each designed especially for MSA Air Masks. Available in high and low pressure with air supply durations of 30, 45 and 60 minutes. Optional custom logos available.
view details

Airline Respirator and Escape Device

The Airline Respirator and Escape Device has a range of up to 15 minutes in the Carbon Fiber version, suitable for use in IDLH environments where air flow can be stopped accidentally or in emergencies where there is a need to escape.
view details

AutoMaXX

With its large, colored operating buttons, swivel connections, silicone line and maintenance-friendly design, this lung-governed demand valve set milestones for fire fighting around the world. Features automatic first-breath activation (depending on model), as well as automatic deactivation on separation from mask (depending on model). Available in both normal and positive pressure versions.
view details

BDmini

Small in size, yet big on performance, this compressed air breathing apparatus was made for short-duration work in confined spaces. It can also be connected to an airline system, cylinder cascade or stationary air source for even more versatility. Features a maintenance-friendly, first-stage pressure reducer and three carrying modes: hip, back, and shoulder.
view details

ClearCommand Communications System

This system enables rescue personnel to communicate over commercially available radios. Attach it to a full facemask (open mode) or put it inside a protective suit (covered mode).
view details

Compressed Airline Breathing Apparatus and Accessories

MSA’s Compressed Airline Breathing Apparatus delivers a ready supply of safe, breathable air wherever air is irrespirable or oxygen deficient. MSA’s corresponding accessories, including compressed air filters and automatic switch valve, ensure air quality and deliverability.
view details

Constant Flow Airline Accessories

These accessories help ensure proper air quality and deliverability when used with MSA constant flow airline systems. Filters remove 99% (minimum) of >0.3 micron particulate for up to 1000 hours of use. Air supply hoses deliver respirable air from 8 to 5 feet in temperatures from -25ºF to 212ºF (depending on type). And cylinder cascade systems deliver single-source air to one or more workers.
view details

Constant Flow Airline Respirator

This Type C, supplied-air respirator supplies a continuous flow of air to the face piece from an external source. The complete assembly is available with either an Ultravue® or Ultra Elite® full face piece, Comfo® half-mask face piece or Comfo welder's face piece, plus breathing tube, web support belt and air flow control valve. Use only in non-IDLH environments.
view details

FireHawk® M7XT Air Mask

Through NFPA, firefighters strive to improve the durability and performance of their SCBA and PASS devices. It's no different with the new 2013 edition of NFPA 1981 and 1982 NFPA standards for self-contained breathing apparatus and personal alert safety systems (PASS). These revisions call for a minimum low pressure alarm set point of 33% cylinder operating pressure remaining, improved facepiece lens radiant heat performance, 500° F heat and flame exposure, and standardized PASS device alarm sound patterns. In addition, NFPA has raised the bar on voice communication capability, now requiring measurable, minimum Sound Transmission Index (STI) scores for both mechanical and electronic communications. MSA's new FireHawk M7XT Air Mask represents a true technological achievement in critical firefighter protection. As firefighters determined the safety requirements required to meet NFPA 1981 and 1982 2013-edition standards, MSA engineering teams began to design solutions. The new FireHawk M7XT Air Mask, with its life-safety design components built upon a modular air mask platform, exceeds NFPA 2013 requirements and provides firefighters with the highest quality SCBA available.
view details

G1 Facepiece

The G1 Facepiece was designed without electronic components, to minimize weight, reduce your stress and fatigue and improve your overall performance level. This design also means that there are no electronic components on the outside of the facepiece that may result in snag and entanglement hazards. What’s more, by eliminating costly electronic components, the price is reduced substantially, allowing personal-issue facepieces to be a cost effective measure. As an added bonus, the facepiece is equipped with cross-contamination prevention to reduce the spread of illness when facepieces are shared. But MSA didn’t stop there. The MSA G1 SCBA is also equipped with a speaking diaphragm to increase speech clarity while off air. The new G1 Facepiece is not only lightweight and compact with overall low profile design, it’s comfortable and built to last. Taking the preferred design features of the Ultra Elite Facepiece, including wide field of view and comfortable, robust seal geometry, we’ve taken the MSA G1 SCBA to the next level with an open port to provide low breathing resistance, both on and off air. The G1 Facepiece can help you to conserve energy for when you need it most.
view details

HP Compressors

Designed to quickly charge 300  and/or 200 bar cylinders, MSA high pressure breathing air compressors work seamlessly as part of an air purification system that meets the highest, most stringent standards. Low operating speed for continuous, reliable operation. All moving parts are electronically balanced to run smoothly. A variety of horizontal, vertical portable and mobile models with charging capacity from 100 up till 570 liters per minute (larger models on request) are available. The compressors can be supplied with electric, gasoline or diesel engines. Vertical models from 230 up to 570 are available also with highly efficient noise suppressing cabinet for indoor application. Great variety of options and accessories are available. * Humidity control * Electronic Computer Control * Oil pressure control * Temperature control * Filling panels
view details

MSA A2 Software

MSA A2 Software offers the ability to customize your SCBA to meet your SOP, analyze use data, as well as provides a simple, reliable method to enhance firefighter safety and accountability on the fire scene by monitoring firefighters’ status remotely from incident command. 
view details

Nightfighter™ Heads-Up Display System

Clearly and easily see air cylinder content when wearing an MSA Ultra Elite Facepiece. This display system includes a transmitter assembly that securely mounts to the SCBA shoulder gauge pressure hose. Sends a digitally encoded signal to the facepiece-mounted receiver. Displays cylinder contents in one-quarter increments. Features 7 LED light patterns.
view details

PremAire® Cadet Escape Respirator

This combination supplied-air respirator with SCBA is designed especially for escape. Versatile, comfortable and affordable, it features a single-assembly first-stage regulator and cylinder valve. Small in size and profile, this one is ideal for working in tight places.
view details

PremAire® Cadet Supplied Air Respirator

Get air on demand with this high-performance, Type C, supplied-air respirator. Mask-mounted regulator responds quickly to changing breathing requirements. Maintains a slight positive pressure to prevent contaminants from invading the face piece. Ideal for chemical and petrochemical processing, municipal utilities, and asbestos and lead paint abatement, as well as non-IDLH environments such as pharmaceutical applications and hazardous materials clean up. Available as a basic supplied air device or as a combination air-line/air-purifying respirator.
view details
Product Comparison Queue (0) Compare Products